PLANE

FPVRAPTOR

FPVraptor

 

Here is what the sales people say about FPV Raptor:

The FPVRaptor is an attractive and superbly designed FPV platform with a a host of neat features that make this model one of the best in it’s class.

For toughness and reliability, the model features a blow moulded fuselage which utilizes Nylon and is virtually indestructable, the flying surfaces are all made from tough EPO foam. From point of view of practicality, the wings are plug in and the model requires no glue for assembly, everything simply screws together. The outer canopy is purely for looks and is used when the FPVRaptor is flown as a glider, it unclips in seconds to reveal a camera ready platform, complete with a pan/tilt servo mounting hole that has been pre-moulded. This large camera platform/wing cover is secured by a quick release latch and once removed, reveals huge canopy area for mounting batteries and FPV equipment onto a pre-fitted ply plate. All servo’s, motor & ESC are of course pre-installed.

The plug in wings have mouldings for adding flaps if desired and there is also a moulded C of G indicator on the underside of the wing for quick pre-flight checks. There is no doubt that this is a superbly designed, high quality FPV model at an excellent price. It would be fair to say that it is more attractive to look at than most FPV platforms, not to mention much tougher, the FPVRaptor will give the RC Pilot hours of enjoyment for many years to come!

Spec:
Wingspan: 1600mm
Length: 1044mm
Flying Weight: 950g
Motor: 2812 1400kv brushless Outrunner – Replace with Turnigy D3536/5 1450KV Brushless Outrunner Motor
ESC: 30A w/BEC – Replace with TURNIGY Plush 40amp Speed Controller
Servo: 9g x 4 – Replece with Turnigy TGY-113MG Metal Gear Digital Servos and add flap servos

Includes:
All Hardware – Almost all, you need to make custom parts if you want it to hold in one piece http://www.thingiverse.com/thing:139096 and http://www.thingiverse.com/thing:139099 and http://www.thingiverse.com/thing:70895 + more to come, such as landing gears and tail wheel

Instructions – (I would not call them instructions, use this page or Youtube)

Prop & Spinner – So far so good

Screwdriver – (Do not let it slip even once)

Requires:
Your Own 4 Channel TX/RX (not ordered yet)
1800mAh 3S Lipoly Battery (not ordered yet)
FPV System –> My FPV system

————————————–

Useful videos for FPV Raptor:
http://www.youtube.com/watch?v=kJPH4orWBRY

https://www.youtube.com/watch?v=ZlGAVnBKnWA

http://www.youtube.com/watch?v=tVFPCb5Zt4k

http://www.youtube.com/watch?v=F1TCQT9kGaA

http://www.rcgroups.com/forums/showthread.php?t=1530414

FPV Raptor fpv_raptor_landing_gears_and_tail_wheel-peterlution-youtube

tail-wheel-not-steerable